Left: A Feeding B Boiler C Solution preparation D Manual soda addition E CIP extract. F CIP insert. The plant provides for the execution of the washing cycles and of productive cycle lines manually. One boiler produces hot water, which is transferred to the starting tank through a manually activated valve. The introduction of soda through a pump, makes possible doing basic washing, over than hot water rinses. It is particularly useful in the case of small non-automatic plants, sauce treatment plants, vegetable oil and similar Washing cycle features: 1) plant rinse with clean water and conveyed to the discharge after the usage (this previous phase can be performed to cold or under controlled temperature) 2) washing under pre-settable temperature (max 90°C) with basic solution 3) final rinse with clean water

NECESSARY DATA FOR THE DESIGN
NEEDED DATA FOR THE DESIGN (TO BE DEFINED WITH THE CUSTOMER)
Properties of available water (drinking or from a well)
Amount and capacity of the tanks to be washed
Amount and lenght of the lines to be washed
Amount of available electric energy

TECHNICAL DATA
TECHNICAL FEATURES
Manual plant for food installation plant
1 tank for washing solution
Water restoration through automatic filling units
1 boiler for hot water production
Distributors with multiple joints for the insertion and the extraction
Heating by electric energy
All the components made of stainless steel AISI 304