Left: A Drinkable water B Demineralized water production C Demineralized water storage D R. hot water E M. hot water F R. cool water G M. cool water H Medicine preparation I Medicine storage L Frame filter press The plant produces zootechnic medicines that are extracted into special containers and manually manufactored on another line. The process water has to be demineralized using a particular plant, with ione-exchange resins. The residual conductivity, according to the final applications, should have a value of 2-10 microS/cm. Water is stored in a bag container, and finally sent to the preparators: batching is made using a litre meter. Solid compounds are previously weighed and manually fed. Each preparator is equipped with a stirrer in order to quickly melt the solids. The thermal cycle is obtained with a hot water coil, inside the tank, and the cooling process is obtained with a cool water (or well water) external jacket Once the batch is finished, it is transfered to the filtering station, using a frame filter press, and then to the department storage tanks. The plant has got a power and control electric switchboard. The management is completely automatic, allowing the temperature and cycle setting-up; manual feeding gives you the power to choose if the cycle can go on or not, when the operation has been already done. The plant is developed according to the customer’s needs and specifications, regarding to the processing, the products and the technologies.

NECESSARY DATA FOR THE DESIGN
NEEDED DATA FOR THE DESIGN (TO BE DEFINED WITH THE CUSTOMER)
Required production capacity
Available water features
Features of the solid compounds needed for the making of the medicine
Available spaces for the location of the plant
Available fluids for the warming and cooling phase.

TECHNICAL DATA
TECHNICAL FEATURES
Plant for the production of demineralized water starting from drinkable water
Demineralized water storage tank, with level controls for an automatic management of the plant
Demineralized water dosage through a litre-meter and manual feeding of the other solid compounds
3 medicine preparators with stirrer, hot water coil and thermoregulation with thermometric probe and automatic on-off valve
Frame filter press with feeding pump
3 final storage tanks of the preparred medicine, from which the product is taken and sent to special containers.
Final manual packaging
General electric switchboard, with PLC for the management of all the cycles and the regulation of the plant